Gateway 901 Series, Руководство по замене

Страница: 47 / 65

42
Replacing Gateway Family Media Center Components
www.gateway.com
9
Slide the front I/O board toward the back of the case, then lift it out of
the case.
10
Install the replacement front I/O board into the case and align the screw
holes with the I/O board standoffs.
11
Secure the front I/O board with the five screws you removed in Step 8.
12
Connect the cables you disconnected from the front I/O board in Step 7.
13
Reinstall the DVD drive bracket by following the instructions in “Replacing
the DVD drive” on page 10.
14
Reinstall the front bezel by following the instructions in “Replacing the
front bezel” on page 8.
15
Reinstall the case cover by following the instructions in “Closing the
Family Media Center case” on page 7.
16
Reconnect the power cord and modem, network, and all peripheral device
cables.
Replacing the input board
To replace the input board:
1
Follow the instructions in “Preventing static electricity discharge” on
page 3.
2
Shut down your Family Media Center, then disconnect the power cord and
modem, network, and all peripheral device cables.
8509776.book Page 42 Monday, January 5, 2004 2:54 PM