Gateway 901 Series, Руководство по замене

Страница: 23 / 65

18
Replacing Gateway Family Media Center Components
www.gateway.com
5
Lift the hard drive duct up and toward the front of the case.
6
Install the replacement hard drive duct. Make sure that the plastic pins fit
firmly in the retention holes in the hard drive module.
7
Reinstall the case cover by following the instructions in “Closing the
Family Media Center case” on page 7.
8
Reconnect the power cord and modem, network, and all peripheral device
cables.
Removing the hard drive module
To replace the hard drive module:
1
Follow the instructions in “Preventing static electricity discharge” on
page 3.
2
Shut down your Family Media Center, then disconnect the power cord and
modem, network, and all peripheral device cables.
3
Press the power button to drain any residual power from your Family Media
Center.
4
Remove the case cover by following the instructions in “Opening the
Family Media Center case” on page 5.
Hard drive duct retention holes
8509776.book Page 18 Monday, January 5, 2004 2:54 PM