Gateway 850, Руководство пользователя, Страница: 41 / 88

37
Enclosure component monitoring
www.gateway.com
Drive slot status LED LED
condition Indication
Drive Slot 1 Off Enclosure in single-bus mode.
Drive Slot 2 On SCSI Host Interface.
Drive Slot 3 Off N/A
Drive Slot 4 Off Switch 1 (A0) is in the DOWN position.
This will set the Drive Slot SCSI IDs to ID
1, 2, 3, 4, 5, 6, 9, 10, 11, 12, 13, and 14.
It reserves IDs 0 and 7 for the HBAs, and
ID 15 for the SAF-TE processor.
Drive Slot 5 Off Indicates that Switch 6 is in the DOWN
position which sets the BAUD rate for the
SAF-TE RS-232 serial port to 9,600.
Drive Slot 6 Off N/A
Drive Slot 7 Off Switch 2 (A1) is in the DOWN position.
This will set the Drive SCSI IDs of the
slots to IDs 1, 2, 3, 4, 5, 6, 9, 10, 11, 12,
13, 14. It reserves IDs 0 and 7 for the host
bus adapter, and SCSI ID 15 for the
SAF-TE processor.
Drive Slot 8 On Switch 7 is in the UP position which sets
the Delay Start mode to be disabled.
Drive Slot 9 Off Controller is not installed.
Drive Slot 10 Off Switch 3 (reserved) is in the DOWN
position.
Drive Slot 11 On Switch 8 is in the UP position which sets
the Remote Start mode to be disabled.
Drive Slot 12 Off Controller is not installed.