background image

1

Danger

■ 

Read this "Note on safety" well enough before use in order to use the unit properly. 

  

Keep this manual carefully after reading through.

■ 

Note described here is for preventing danger to user or other people and damage 

  

to property, so be sure to observe.

■ 

Classified marking below describes the degree of danger and damage caused 

  

when you do not observe the description and use the unit in a wrong mann

.Note on safety

Be sure to observe them.

This marking shows that "imminent 
danger is present which leads to 
death or serious injury" when the 
unit is used in a wrong mann

Warning

This marking shows that "possibility 
is present which leads to death or 
serious injury" when the unit is 
used in a wrong manne

Caution

This marking shows that 
"possibility of injury is present and 
only physical damage is likely" 
when the unit is used in a wrong 
mann

■ 

The classified pictorial marking below shows description to be observed

This marking shows "prohibition" of what must not be performed

This marking shows "forcing" of what must be performed.

Do not give strong shock and do not throw 
the unit.

 

 Incompliance may lead to failure and fire.

Do not use the unit in a place where 
inflammation or explosion is possible.

 When this unit is used in a place where 

inflammable gas such as propane gas or 
gasoline or dust is generated, it may lead 
to explosion or fir

Do not disassemble or modify the unit.

 Incompliance may lead to fire, injury, and 

electric shock.

Never expose the unit to any liquid such as 
water and solvent. Do not use the 
microphone in an environment where water 
or grease may depos

Warning

Содержание U-507

















Отзывы: