Gates Underwater Products
5111 Santa Fe Street, Suite H San Diego, CA 92109
858-272-2501 800-875-1052 Fax 858-272-1208 [email protected] www.GatesHousings.com
June 28, 2006
18
5. Plug in the monitor cable to the HVX200 housing bulkhead connector, which is
found on the right side of the housing. Mate the cable until fully seated into the
bulkhead connector.
a
Caution
:
If you are not using the monitor for any reason, do not plug the RCA
connector into the camera.
6. Verify operation by turning on the camera. If properly connected, the monitor will
automatically turn on and display an image. You may have to wait 3-4 seconds before
an image will appear.
Monitor Setup, Use and Care
The Monitor SU&C Guide is included as a separate document with your HVX200 Guide.
Housing Care and Maintenance
Proper care of your Gates housing is important to provide you reliable operation and long
life. You’ll find all the guidelines in the “Housing Care and Maintenance” document,
which is provided separately.
Plug in the monitor cable to
the bulkhead connector. If
necessary, use water or
silicone lubricant for easier
mating of the connectors.
