Gates Underwater Products
5111 Santa Fe Street, Suite H San Diego, CA 92109
858-272-2501 800-875-1052 Fax 858-272-1208 [email protected] www.GatesHousings.com
June 28, 2006
6
4. Secure the camera. Underneath the mount plate, use the two gold thumbscrews to
secure the camera mount plate to the housing. Tighten until snug.
5. Check controls. With the camera turned on and installed into the housing front,
press in each control and confirm proper operation (refer to the next section for more
detail on controls).
a
Tip:
With the camera installed you can now get a good view inside the front half of
the housing and most controls. Use a flashlight if necessary to become familiar with
the operation and ‘feel’ of each control in their proper position prior to closing the
housing.
Pull out controls and
gently insert the
camera into the
housing.
Camera mount plate
thumbscrews.
