Gates Underwater Products
5111 Santa Fe Street, Suite H San Diego, CA 92109
858-272-2501 800-875-1052 Fax 858-272-1208 [email protected] www.GatesHousings.com
June 28, 2006
10
Control Operation
• Power (Camera On/Off) This control is located on the back window. The positions
for this control are exactly like that found on the camera switch. Rotate clockwise to turn
on, and opposite to turn off.
• Record/Standby The Record Standby control is
red
and operates by a short motion
counter-clockwise on the lever trigger. Press once to Record; press again for Standby.
You will “feel” the record/standby button on the camera actuate through the control as it
is depressed.
• Zoom The Zoom control is
blue
for quick identification. It operates with a simple
rotational movement of the lever trigger. Note that the zoom is variable – that is, the
further you move the control, the faster the camera will zoom.
• Neutral Density (ND) Filter The ND Filter Control rotates to move through the 3
ND settings: Off, 1/8 and 1/64.
• Auto/Manual (A/M) Focus The A/M Focus control toggles the camera between
manual and auto focus modes. When in manual focus, the manual focus knob can be
used to focus on subjects.
• Manual Focus Knob The Manual Focus Knob is located on the left side in front of
the side window, and provides fine control of focus. The A/M focus control must be used
to set the camera into manual focus mode to utilize this control.
• Filter Control Rotate this control to move the color correction filter in and out of
position in front of the camera lens. It will stop when centered over the lens.
• Flip Diopter Control (optional) The flip diopter works similar to the filter control.
A simple rotation will ‘flip’ the diopter into position. NOTE that the flip diopter is not
compatible with the SWP44 port.
Rotate Control
to move the
filter
