![Gastroback Vita-Spin-Deep-Fryer Скачать руководство пользователя страница 61](http://html1.mh-extra.com/html/gastroback/vita-spin-deep-fryer/vita-spin-deep-fryer_operating-instructions-manual_3719023061.webp)
61
6. Insert the hinges of the lid in the respective openings in the upper brim of the
housing of the appliance. Then press the hinges down at both sides until they
engage with a click.
7. Close the lid.
8. Insert the filter insert into the filter opening and close the filter cover.
9. Insert the dripping cup at the rear of the appliance.
STORAGE
WARNING:
Housing, lid, oil container and heating rod get very hot during
operation. Always switch off (SPIN timer to 0, temperature dial to MIN) and unplug
the appliance when it is not in use. Let the appliance cool down, before cleaning
or storing the appliance.
Always clean the appliance and all its parts before storing to avoid accumulation of
dried-on food (see: ›Care and Cleaning‹). Do not leave the appliance unattended
while it is connected to the power supply to avoid risk of electric shock and fire.
Ensure to store the appliance where it is clean, dry and safe from frost, direct sunlight
and inadmissible strain (mechanical or electric shock, heat, moisture) and where it is
out of reach of young children
. Place the appliance on a clean and stable surface,
where it cannot fall. Do not place any hard or heavy objects on the appliance or
any part of it.
Always handle the power cord with care. Power cords may never be knotted, twi-
sted, pulled, strained, or squeezed.
Do not use any parts or accessories of the appliance for any other purpose than ope-
rating the appliance. It is good advice to store the parts and accessories of the appli-
ance with the appliance. For this, completely reassemble the appliance after cleaning
(see: ›Care and Cleaning‹), thus protecting all parts against damage and loss.
CAUTION:
Do not hold the appliance by the lid, power cord, or handle of the
basket for moving the appliance. To move the appliance, always hold the housing
at both sides near the bottom to avoid damage.
1. Grasp the housing with both hands at its sides, and place it on a suitable surface,
where it cannot fall, and is out of reach of young children.
2. Wind the power cord loosely around the housing.