![Gastroback Vita-Spin-Deep-Fryer Скачать руководство пользователя страница 47](http://html1.mh-extra.com/html/gastroback/vita-spin-deep-fryer/vita-spin-deep-fryer_operating-instructions-manual_3719023047.webp)
47
PROPERTIES OF YOUR NEW DEEP FRYER
Frying is a gentle way of cooking even delicate food that will easily degrade. Your
new Deep Fryer heats up cooking oil to a freely selectable temperature of up to
195° C. Due to the exactly controlled temperature setting, you will always get the
best results. As soon as the preselected temperature is reached, the food can be hea-
ted swimming in the hot oil bath, thus being cooked evenly at all sides.
However, the drawback of this cooking technique is an increased fat content in fried
food. To overcome this disadvantage as far as possible, your new Deep Fryer is
equipped with a spinning feature. This way, by hurling out surplus oil, the fat content
of your meals can be reduced by one third, compared to other frying techniques.
Thus you can enjoy fried meals that are easier to digest with less calories.
SAFETY CONCEPT
WARNING:
For your protection and convenience, your new Deep Fryer is
equipped with various safety features. Do not attempt to damage or by-pass the
safety interlocks! Do not attempt to operate the appliance using others than the
designated parts (e.g. oil container, basket).
OVERHEAT PROTECTION
At the back of the control unit is a thermal cut-out that prevents overheating. If the
fryer does not heat up, the thermal cut-out could have been triggered and switched
off the control unit. This could occur, for example, if the fryer has been operated with
an insufficient amount of oil in the oil container. To re-start the appliance:
1. Switch off (temperature dial to MIN), and unplug the appliance. Wait until the
appliance and oil cooled down.
2. Open the lid.
Important:
Keep in mind that oil could drip from the basket and heating rods when
taking out these parts.
3. Take out the basket and place it, for example, on a flat dish.
4. Take out the control unit (see: ›Disassembling the Appliance‹). At the rear (poin-
ting towards the housing of the appliance) is a small red reset button.
5. Press the reset button.
6. Ensure that the filling level in the oil container is between the MIN and MAX filling
level marks. Reassemble the control unit and basket. Thereafter, you can operate
the appliance quite normally (see: ›Operation‹).