![Gastroback Vita-Spin-Deep-Fryer Скачать руководство пользователя страница 59](http://html1.mh-extra.com/html/gastroback/vita-spin-deep-fryer/vita-spin-deep-fryer_operating-instructions-manual_3719023059.webp)
59
5. Press the basket release button, lift up the basket, and remove it.
6. Lift the control unit up and out.
For this, use the handle on top of the control unit. You can pull the handle somewhat
out of the control unit to get a better grip. Pull the control unit upwards and out.
Important:
Ensure, not to spill the oil, while removing the oil container.
7. Carefully take out the oil container to avoid spilling the oil. Push the container
release slider to the right side. Then turn the oil container counterclockwise to the stop,
and lift it carefully up and out.
8. Pour the oil into a suitable container.
9. Remove the dripping cup from the rear of the appliance.
10. Dispose degraded oil in a closed container in domestic refuse.
DO NOT
dispose
oil in the sink!
CLEANING THE APPLIANCE
CAUTION:
Do not use any abrasive cleaners, cleaning pads (e.g. metal scou-
ring pads), or any corrosive chemicals (e.g. bleach) for cleaning the appliance or
any parts of it, to avoid damage to the surfaces. Do not use any hard or sharp-
edged objects for cleaning. Do not immerse the housing, control unit, or power
cord in water or any other liquid. Do not spill or drip any liquids on or in the hou-
sing, control unit, or power cord to avoid risk of fire and electric shock.
Do not
clean housing, control unit, or power cord in an automatic dishwasher.
Do not
use violence!
1. It is a good idea to wipe residues of oil from the oil container first. For this, you
may use paper towels or something similar.
2. Basket, lid, filter cover, oil container, and dripping cup can be washed in warm
soapy water. However, you can clean these parts in an automatic dishwasher.
As far as possible, use the upper tray.
CAUTION:
Do not insert the control unit into liquids. Clean the heating rods
and wires of the temperature probe with special care to avoid damage. Do not drip
any liquids in the housing of the appliance or on the control unit or power cord.
3. Wipe the control unit and heating rods carefully with a cloth or
SOFT
brush,
slightly damped with warm dishwater. Thereafter, wipe with clear tap water.
Doing so, ensure not to spill water on the black body of the control unit.