42
to 0) then unplug the appliance, before moving, or cleaning the appli-
ance, or when the appliance is not in use. Always hold the housing
at both sides near the bottom for moving or lifting.
Do not hold the
appliance at the lid, power cord, or handle of the control unit for
moving the appliance.
Do not place any hard and/or heavy objects
on the appliance or any part of it.
• Do not use any abrasive cleaners, cleaning pads (e.g. metal scou-
ring pads), or any corrosive chemicals (e.g. bleach) for cleaning. Do
not immerse the control unit, housing or power cord in water or any
other liquid. Do not spill or drip any liquids on the control unit, hou-
sing, or on the power cord to avoid risk of fire and electric shock.
Do
not place the control unit, housing or power cord in an automatic
dishwasher.
• Do not leave any food dry on the appliance. Do not store the oil in
the oil container of the appliance. Always clean the appliance after
each use to prevent an accumulation of baked-on foods (see: ›Care
and Cleaning‹). Always keep the appliance and its parts clean.
• This appliance is intended to be used in household and similar appli-
cations such as:
– staff kitchen areas in shops, offices and other working environments;
– farm houses;
– by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments.
IMPORTANT SAFEGUARDS FOR ALL ELECTRICAL APPLIANCES
The appliance is driven electrically. Place the appliance near a suitable
wall power socket to connect the appliance directly to a protected mains
power supply with protective conductor (earth/ground) connected proper-
ly. Ensure that the voltage rating of your mains power supply corresponds
to the voltage requirements of the appliance (230 V, 50 Hz, AC, rated for
at least 16 A). The power outlet socket must be installed separately from
other power outlet sockets to avoid interference with other appliances.
