57
SOLVING PROBLEMS
If any problems occur during operation, you will find solutions in this section. Further
information on processing your food is given in section Tips for Best Results.
Problem
Reason
The Solution
You cannot insert the control
unit completely.
The control unit is tilted a little.
Lift the control unit a little, then try
again.
You cannot insert the oil contai-
ner properly.
The oil container is in wrong
orientation.
The oil container can only be inserted in
one orientation. Hold the oil container
with the MIN/MAX filling level marks
facing to the back of the appliance. Turn
the oil container a little back and forth.
The container release slider is
locked.
Push the container release slider to the
right.
The coupling of the centrifuge is
positioned somewhat unfavou-
rable.
Turn the oil container a little back and
forth, until it slips onto the coupling.
You cannot close the lid.
The container release slider is
not closed.
Push the container release slider to the
oil container.
The hinges of the lid are not
engaged properly.
Ensure that both hinges are inserted in
the respective opening of the housing.
Press down the hinges until they engage.
The centrifuge does not work.
The centrifuge will only work
with the lid closed properly.
Close the lid.
The basket must be locked in the
upper position.
Lift and lock the basket to the upper
position.
The basket cannot be locked in
the upper position.
The basket is not mounted cor-
rectly.
Take out the basket and insert it again.
Doing so, ensure that you insert the black
handle of the basket into the guide of
the control unit.
