90
91
TEXTURING MILK
The »Design Espresso Advanced Professio-
nal« allows you to texture milk automatically
as well as manually. However, always start
with fresh, cold milk.
In standby mode the SELECT dial is used to
select milk temperature. Press the SELECT dial
to toggle to milk texture: 9 levels from cap-
puccino (“CAPP”) to latté. The flashing value
(either temperature or texture triangle) can be
changed by rotating the SELECT dial.
WARNING – Risk of Burns!
Shortly after
operation, hot steam and hot water could
escape from the steam wand. Do not hold
your hands near the steam wand tip. Always
ensure that the steam wand points to the drip
tray, when not in use. Children must always
be supervised when they are near the Espres-
so Machine.
Note:
For optimum milk texturing performance it
is critical that the holes around the steam
tip are clear. Even partially blocked holes
may affect the ability of the steam wand to
produce sufficient foam. Prior to texturing
milk, always purge the steam wand by
momentarily lifting the steam lever to the
upper MANUAL position.
The key is to consume textured milk, before
the milk begins to separate. However, dif-
ferent brands and types of milk and milk
alternatives will texture differently. Additi-
onally, the freshness of the milk will have
influence. You may need to adjust the set-
tings accordingly.
Note:
If the Espresso Machine is run continuously
for 30 minutes, allow the Espresso Machi-
ne to cool for 5 minutes before each use.
AUTOMATIC HANDS-FREE MILK
TEXTURING
To Set Milk Temperature
1. In standby mode rotate the SELECT dial
to the desired milk temperature. The
selected temperature will be displayed
on the steam LCD display.
The ideal temperature for milk is between
55ºC–65ºC as indicated by the smiley
face icon.
PR OD
MIN
MAX
MILK MUST
COVER THIS
SEAL
STEAM
SELECT
SELECT
SELECT
TEMP TEXTURE
TEMP TEXTURE
TEMP TEXTURE
SEL
SE
SE
SE
ECT
CT
CT
CT
SEL
SE
SE
SE
ECT
C
C
C
SEL
SE
SE
SE
ECT
C
C
C
SEL
SE
SE
SE
ECT
C
C
C
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
MP
P
P
P
MP
P
P
P
MP
P
P
P
MP
P
P
P
STEAM
SELECT
SELECT
SELECT
TEMP TEXTURE
TEMP TEXTURE
TEMP TEXTURE
Adjusting Milk Texture
2. In standby mode press the SELECT dial to
toggle to the milk texture function, as indi-
cated by the flashing milk texture triangle
on the steam LCD display.
PR OD
MIN
MAX
MILK MUST
COVER THIS
SEAL
STEAM
SELECT
SELECT
SELECT
TEMP TEXTURE
TEMP TEXTURE
TEMP TEXTURE
SEL
SE
SE
SE
ECT
CT
CT
CT
SEL
SE
SE
SE
ECT
C
C
C
SEL
SE
SE
SE
ECT
C
C
C
SEL
SE
SE
SE
ECT
C
C
C
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
MP
P
P
P
MP
P
P
P
MP
P
P
P
MP
P
P
P
STEAM
SELECT
SELECT
SELECT
TEMP TEXTURE
TEMP TEXTURE
TEMP TEXTURE
3. Rotate the SELECT dial towards “CAPP”
for more texture or “LATTE” for less tex-
ture. There are 9 levels.
Texturing the Milk
Note:
Keep a clean, damp cloth at hand to wipe
the steam wand after usage.
