Gastroback 42640, Руководство по эксплуатации

Страница: 102 / 108

102 103
rSEt will appear on the LCD.
NOT PROGRAMMED
PROGRAMMED
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
UC T
PROGRAMMED
+
POWER
c) Rotate SELECT dial until ‘dESC” appears
on LCD and press the dial to confirm.
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
REMOVE
2 Empty Boilers
WARNING:
Always ensure that the drip
tray is inserted properly, before opening the
valves. Do not hold your hands or any deli-
cate objects near the boiler valves at the DES-
CALE ACCESS to avoid injuries and damage
due to hot water splashing out and steam that
may escape, when opening the boiler valves.
Always cover the drip tray beneath the valves
with a cloth, before opening the valves.
a) Remove the grey silicone cover on the
lower front panel marked DESCALE
ACCESS.
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
REMOVE
b) Place a cloth over the drip tray to prevent
steam escaping.
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
REMOVE
c) Use a flat head screw driver to rotate
the right valve counter-clockwise SLOWLY
until fully open. As the valve opens, steam
may be released.
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
REMOVE
d) Repeat the above process on the left
valve.
Note:
If there’s no water released into the drip
tray, press and hold the 1 CUP button for
3 seconds. This will release water from the
boiler.
When the water is completely empty, close
the valve by rotating screws clock-wise until
seated. Do not overtighten screws to avoid
damages to the valves.
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
REMOVE
e) Empty the drip tray, use caution as the
drip tray may be hot.
f) Empty water tank, remove water filter.