9
Operating instructions
Back-up boiler start-up (gas/oil firing mode)
Using this switch you can connect or disconnect the back-up
boiler linked to the GASOGEN G3 2S from the control panel .
-
With the switch in the ‘0’ position the back-up boiler is
not switched on (green led light off)
-
With the switch in the ‘I’ position the back-up boiler is
connected to the mains electricity supply (green led light illu-
minated) and is ready to fire (wood or gas/oil – refer to fol-
lowing points.
The recycle pump functions.
Mode selection keys (gas-oil firing mode)
With the switch nr. 13 you can connect or disconnect the sy-
stem pump/boiler load from the mains electrical system.
-
With the switch in the ‘0’ position the system pump is
not switched on.
-
With the switch in the ‘II’ position the system pump is
connected to the mains electricity supply.
Note:
The upper loading door must be closed.
With the switch 22 it is possible to select the operation mode
(wood or the back-up gas or oil fired boiler)
.
-
Place the switch into the ‘I’ position (gas/oil firing mode)
With the switch nr. 23 you can connect or disconnect the bur-
ner (gas or oil) from the mains electrical system.
-
With the switch in the ‘0’ position the burner is not fired.
-
With the switch in the ‘II’ position the burner is connected
to the mains electricity supply.
The recycle pump is not running.
11
11
12
13
12
13
22
23
22
23
22
23
