4
Operating instructions
6 - OPERATING INSTRUCTIONS
6.1 - STANDARD CONTROL PANEL
IMPORTANT!
Before connecting the control panel to the mains,
check that all the switches are in the ‘0’ position
and that the safety thermostat is “on”.
Boiler start-up
Using this switch you can connect or disconnect the boiler from
the mains electricity supply .
-
With the switch in the ‘0’ position the boiler is not
switched on (green led light off)
-
With the switch in the ‘I’ position the boiler is connected
to the mains electricity supply (green led light illuminated) and
is ready to operate.
The recycle pump functions.
Mode selection keys
With the switch nr. 13 you can connect or disconnect the sy-
stem pump/boiler load from the mains electrical system.
-
With the switch in the ‘0’ position the system pump is
not switched on.
-
With the switch in the ‘II’ position the system pump is
connected to the mains electricity supply.
11
11
32. Working thermostat
41. Main fuse (4A)
42. Boiler thermometer
11. Mains switch
12. Fan switch
13. System pump switch
31. Safety thermostat
12
13
12
13
Gasogen
