GAS GAS MC 450F 2022, Руководство пользователя

Страница: 62 / 157

11 SERVICE WORK ON THE CHASSIS
60
S05134-10
(MC 450F TROY LEE DESIGNS)
–
Loosen screws
1
.
–
Remove screw
2
.
–
Loosen and retighten screw
3
.
Guideline
Screw, top steering
head M20x1.5 12 Nm (8.9 lbf ft)
–
Using a plastic hammer, tap lightly on the upper triple clamp to
avoid stresses.
–
Mount and tighten screw
2
.
Guideline
Screw, top triple
clamp M8 17 Nm (12.5 lbf ft)
–
Tighten screws
1
.
Guideline
Screw, top triple
clamp M8 17 Nm (12.5 lbf ft)
–
Check the steering head bearing play. ( p. 58)
Finishing work
–
Mount the handlebar cushion.
–
Remove the motorcycle from the lift stand. ( p. 49)
11.15 Lubricating the steering head bearing
H02387-01
–
Remove the lower triple clamp. ( p. 54)
–
Install the lower triple clamp. ( p. 55)
Info
The steering head bearing is cleaned and lubricated in the
course of removal and installation of the lower triple clamp.
11.16 Removing the start number plate
A00778-10
–
Remove screw
1
.
–
Unhook the start number plate from the brake line and remove it.