GAS GAS MC 450F 2022, Руководство пользователя

Страница: 73 / 157

SERVICE WORK ON THE CHASSIS 11
71
11.32 Changing the glass fiber yarn filling of the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the glass fiber yarn filling escape and the damper "burns" out.
Not only is the noise level higher, but the performance characteristics change.
Preparatory work
–
Remove main silencer. ( p. 69)
S02309-10
Main work
(All standard models)
–
Remove all the screws on the main silencer.
–
Take off silencer cap
1
and O-ring
2
.
–
Pull glass fiber yarn filling
3
out of the silencer cap.
–
Pull glass fiber yarn filling
4
from the inner tube.
–
Clean the parts that need to be reinstalled and check for dam-
age.
–
Mount new glass fiber yarn filling
4
on the inner tube.
–
Position new glass fiber yarn filling
3
in the silencer cap.
–
Insert O-ring and silencer cap into outer tube
5
.
–
Mount and tighten all of the screws.
Guideline
Screws on main
silencer M5 7 Nm (5.2 lbf ft)
H03387-10
(MC 450F TROY LEE DESIGNS)
–
Drill out all rivets on the main silencer and remove steel strips.
Carefully remove rivets in inward direction.
Info
Remove all remains of rivets from the inside of the main
silencer.
–
Take off silencer cap
1
and outer tube
2
.
–
Pull glass fiber yarn filling
3
off of inner tube
4
.
–
Clean the parts that need to be reinstalled and check for dam-
age.
–
Wind adhesive tape around the end of inner tube
4
.
–
Mount new glass fiber yarn filling
3
on inner tube
4
.
–
Remove adhesive tape from inner tube
4
.
–
Slide outer tube
2
over the glass fiber yarn filling
3
.
–
Insert silencer cap
1
into the outer tube.
–
Position steel bands and mount new rivets.