GAS GAS MC 450F 2022, Руководство пользователя

Страница: 56 / 157

11 SERVICE WORK ON THE CHASSIS
54
S05129-11
(MC 450F TROY LEE DESIGNS)
–
Tighten screws
2
.
Guideline
Screw, top triple
clamp M8 17 Nm (12.5 lbf ft)
–
Tighten screws
3
.
Guideline
Screw, bottom triple
clamp M8 12 Nm (8.9 lbf ft)
A00885-11
–
Position the brake caliper. Mount and tighten screws
4
.
Guideline
Screw, front
brake caliper M8 25 Nm (18.4 lbf ft)
Loctite ® 243™
–
Position the brake line and the clamp. Mount and tighten
screws
5
.
Guideline
Screw, brake line
holder EJOT 1.7 Nm (1.25 lbf ft)
Finishing work
–
Install the front wheel. ( p. 99)
11.11 Removing the lower triple clamp
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 49)
–
Remove the front wheel. ( p. 98)
–
Remove the fork legs. ( p. 52)
–
Remove the start number plate. ( p. 60)
–
Remove front fender. ( p. 61)
–
Take off the handlebar cushion.
A00801-10
Main work
(All standard models)
–
Open cable holder
1
on the left and detach the wiring har-
ness.
–
Remove screw
2
.
–
Remove screw
3
.
–
Take off the upper triple clamp and handlebar and set it aside.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.