20
20
NMEA:
NMEA-output
Activation or de-activation of particular NMEA Data-sets at the
output of the Volkslogger (see Addendum).
The parameters, which are selected in the menus
CFG1
and
CFG2
remain intact even
after switching the instrument off and do not have to be selected again each time.
(Exception: When the electronic seal of the instrument is broken, the selections are no
longer stored, rather they return to their default value after each new switching-on of the
instrument).
5.4.
Acoustical Signals
The VOLKSLOGGER is capable of communicating acoustical signals to the pilot at
different system conditions and events.
The following events and conditions lead to acoustical signals (beeps in different
rhythms):
•
Automatic warnings, combined with the display of a warning on the screen
•
Battery warning
When the supply voltage drops below the value of 9.5 Volts
•
Memory warning
When the remaining storage capacity is less than 8 hours
•
The automatic warnings are repeated every 256 seconds, if the cause persists
•
Controllable through
CFIG1.SND.WRN
•
Recording in the short interval mode (1 s)
•
When the marker key is depressed
•
Controllable through
CFG1.SND.MRK
•
Location within the observation Zone of a turn point
•
When the observation zone was entered and valid points are being collected
•
Controllable through
CFG1.SND.OZ
•
Positive “rounding” of the turn point
•
When a sufficient number of position fixes have been collected within the
observation-zone of the turn point.
•
Controllable through
CFG1.SND
•
Warning at critical user actions which could interrupt the recording of flight data and
are executable only after double affirmation from the user (erasing (clearing) of
memory, activation of PC-mode, execute flight declaration)
