Static
: The wind speed and direction are assumed to be
constant for the duration of the jump. The drop altitude must
be at least 1,000 feet.
Entering Jump Information
1
Select the action key.
2
Select
Jumpmaster
.
3
4
Complete one or more actions to enter your jump
information:
• Select
DIP
to set a waypoint for the desired landing
location.
• Select
Drop Alt
to set the drop altitude AGL (in feet)
when the jumpmaster exits the aircraft.
• Select
Open Alt
to set the open altitude AGL (in feet)
when the jumpmaster opens the parachute.
• Select
FWD Throw
to set the horizontal distance traveled
(in meters) due to aircraft speed.
• Select
Crs to HARP
to set the direction traveled (in
degrees) due to aircraft speed.
• Select
Wind
to set the wind speed (in knots) and direction
(in degrees).
• Select
Constant
to fine-tune some information for the
planned jump. Depending on the jump type, you can
select
Percent Max
,
Safety Fctr
,
K-Open
,
K-Freefall
, or
K-Static
and enter additional information (
).
• Select
Auto to DIP
to enable navigation to the DIP
automatically after you jump.
• Select
GOTO HARP
to start navigation to the HARP.
Entering Wind Information for HAHO and HALO
Jumps
1
Select the action key.
2
Select
Jumpmaster
.
3
4
Select
Wind
>
Add
.
5
Select an altitude.
6
Enter a wind speed in knots and select
Done
.
7
Enter a wind direction in degrees and select
Done
.
The wind value is added to the list. Only wind values
included in the list are used in calculations.
8
Repeat steps 5–7 for each available altitude.
Resetting Wind Information
1
Select the action key.
2
Select
Jumpmaster
.
3
Select
HAHO
or
HALO
.
4
Select
Wind
>
Reset
.
All wind values are removed from the list.
Entering Wind Information for a Static Jump
1
Select the action key.
2
Select
Jumpmaster
>
Static
>
Wind
.
3
Enter a wind speed in knots and select
Done
.
4
Enter a wind direction in degrees and select
Done
.
Constant Settings
Select
Jumpmaster
, select a jump type, and select
Constant
.
Percent Max
: Sets the jump range for all jump types. A setting
less than 100% decreases the drift distance to the DIP, and
a setting greater than 100% increases the drift distance.
More experienced jumpmasters may want to use smaller
numbers, and less experienced skydivers may want to use
larger numbers.
Safety Fctr
: Sets the margin of error for a jump (
HAHO
only).
Safety factors are usually integer values of two or greater,
and are determined by the jumpmaster based on
specifications for the jump.
K-Freefall
: Sets the wind drag value for a parachute during
freefall, based on the parachute canopy rating (
HALO
only).
Each parachute should be labeled with a K value.
K-Open
: Sets the wind drag value for an open parachute,
based on the parachute canopy rating (
HAHO
and
HALO
).
Each parachute should be labeled with a K value.
K-Static
: Sets the wind drag value for a parachute during a
static jump, based on the parachute canopy rating (
Static
only). Each parachute should be labeled with a K value.
Viewing Tide Information
NOTE:
This feature is not available in all areas.
You can view information about a tide station, including the tide
height and when the next high and low tides will occur.
1
Select the action key.
2
Select
Tides
>
Search Near
.
3
Select an option:
• To search near a previously saved waypoint, select
Waypoints
, and select or search for a waypoint.
• To search near a specific city, select
Cities
, and select or
search for a city.
A list of the tide stations near the selected location appears.
4
Select a station.
A 24-hour tide chart appears for the current date, showing
the current tide height
À
and when the next high
Á
and low
tides
Â
will occur.
5
Select an option:
• To view more detailed information about the next four tide
peaks and troughs, select .
• To pan the tide chart, select the action key, and select
Pan Chart
.
• To view tide information for a different date, select the
action key, select
Change Date
, and select the date.
Clock
Setting the Alarm
1
Select the action key.
2
Select
Clock
>
Alarm Clock
>
Add Alarm
.
3
Select the action key, , and to set the time.
4
Select
Tone
,
Vibration
, or
Tone & Vib.
.
5
Select
Once
,
Daily
, or
Weekdays
.
Starting the Countdown Timer
1
Select the action key.
2
Select
Clock
>
Timer
.
3
Select the action key, , and to set the time.
4
If necessary, select
Notification
, and select a type of
notification.
5
Select
Start
.
Applications
7
Содержание tactix
Страница 1: ...tactix Owner s Manual September 2013 190 01652 00_0A Printed in Taiwan ...
Страница 23: ......