![background image](http://html.mh-extra.com/html/garmin/navtalk-pilot/navtalk-pilot_pilots-manual-and-reference_565018070.webp)
56
Section 4
Cell Phone
Reference
DTMF GPS Location Reporting
The NavTalk Pilot can transmit information about
your geographic location to another NavTalk, NavTalk
Pilot or other type device that can interpret DTMF tones
to plot your GPS position. You can also record a GPS
position from another unit and store that location in the
GPS receiver data storage. Refer to pages 50 and 130 for
Remote Command feature programming for querying a
position report using an active call.
To report your GPS Position:
1. Make certain the GPS receiver is operating and
collecting current data.
2. Connect to the reporting destination using the
Phone portion of the NavTalk Pilot.
3. When contact has been made (your call has been
answered) press and hold the
SEND
key for more
than one second to send your position via DTMF
tones... or press
MENU
and select ‘Send Location’
... or use the
”T”
code in your dialing string and
then press
ENTER
.
To receive a GPS Position Report:
1. Connect to the reporting caller using the Phone
portion of the NavTalk Pilot.
2. Press
MENU
and select ‘Query Location’ from the
Dialing Page... or use the
“Q”
code in your dialing
string.
3. When the new position is received, a pop-up
message, ‘Do you want to save the PHONE
waypoint?’ will appear. Press
ENTER
to confirm
and the new PHONE waypoint will be displayed.
If you have already received a previous Position
Report and have not renamed it in order to save it, the
incoming Position Report will overwrite it. Be certain to
rename and save positions you want to keep for later use.
When you press
ENTER
to confirm the
PHONE waypoint it
will be centered on the
Map Page. If you
want to navigate to the
PHONE waypoint,
press the
#/GOTO
key, cursor to the
PHONE waypoint and
press
ENTER
. The
phone number will
appear just behind the
PHONE waypoint.