106
Section 6
GPS Receiver
Reference
GOTO Navigation
The NavTalk Pilot can navigate to a destination using
any of three different methods:
GOTO—
lets you select a waypoint as your
destination and quickly plot a direct course from present
position to that waypoint.
TracBack—
allows you to retrace your path using
the track log automatically stored in the receiver’s
memory. This eliminates the need to store waypoints
along the way. (See page 108 for more information about
TracBack.)
Routes—
allows you to manually create a sequence
of intermediate waypoints which lead you to your final
destination. The unit will store up to 20 reversible routes,
with up to 30 waypoints in each route.
The easiest way to select your destination is by using
the
#/GOTO
key. The
#/GOTO
key can be used by
itself, after highlighting a waypoint name on a list, or after
designating a position on the map display.
To GOTO a waypoint:
1. Press
#/GOTO
. The GOTO page shows a series of
file tabs for ‘Recent’ waypoints, ‘User’ waypoints or
‘Spell n Find’.
2. To GOTO a recently used waypoint, select the
‘Recent’ tab, highlight the desired waypoint and
press
ENTER
.
3. To GOTO a user waypoint, select the ‘User’ tab,
highlight the desired waypoint and press
ENTER
.
4. To enter the identifier of the destination waypoint,
select the ‘Spell n Find’ tab and highlight the
waypoint identifier (name) field. Press
ENTER
and
use the
ARROW
or phone keypad to enter the
identifier of the desired waypoint. Press
ENTER
to
confirm the selection.
To GOTO a waypoint,
press
#/GOTO
and
highlight the waypoint
identifier field at the
top of the page.
Press
ENTER
and use the
ARROW
or phone keypad
to enter the identifier of the
destination waypoint.
Press
ENTER
to begin
navigation.
