![Garmin GPS Kit Скачать руководство пользователя страница 38](http://html.mh-extra.com/html/garmin/gps-kit/gps-kit_owners-manual_566664038.webp)
36
If ‘GARMIN DGPS’ or ‘RTCM/NMEA’ format is selected,
additional fields are provided to control a GARMIN
differential beacon receiver (e.g. GBR 21) directly from your
eTrex. You can enter the beacon frequency and bit rate when
you select ‘User’ from the Beacon pop-up list to manually
tune the receiver (you can also ‘scan’ if you don’t know what
the nearby station is, but the unit could continue scanning
if reception is temporarily lost).
To select an I/O Format:
1. Press the
PAGE
button and switch to the ‘MENU’
Page. Use the
UP
and
DOWN
button and highlight
the ‘SETUP’ field. Press
ENTER
. The ‘SETUP’ Page
appears.
2. Press the
UP
or
DOWN
button and select the
‘INTERFACE’ field. Press
ENTER
. The ‘INTERFACE’
Page appears.
3. Press
ENTER
on the ‘I/O FORMAT’ field. Press the
UP
or
DOWN
button to select the desired format.
Press
ENTER
. Press
PAGE
to return to the page of
your choice.
System Page
The System Page shows you the current software
version and allows you to choose from three modes of
operation:
• Normal
• Battery Save
• Demonstration (DEMO)
Normal Mode
The GPS receiver is turned on all the time when it’s in
‘NORMAL’ mode. The normal mode is more sensitive to
sudden turns or change of speed/acceleration.
System Page
The System Page shows
you the software version,
allowing you to update
from GARMIN’S web site.
A ‘BATTERY LOW’
message appears at the
bottom of every page
when there is
approximately ten
minutes of battery life left.
Reference