29
You may not remember the original direction of the
saved track, but by using ‘BEGIN’ or ‘END’, you can always
select where you want to “TracBack to” without remember-
ing the directions of the saved track.
To rename a saved track:
1. The information on page 15 shows how to rename a
waypoint name. Use the same method to change a
saved track name.
Setup Page
The Setup Page allows you to customize the eTrex. On
the Setup Page you can change coordinate systems, map
datums, and distance units. You can also change the time
format, north reference, operating mode, display contrast,
and display back light timeout.
Time Format
The ‘Time’ Page allows you to select a 12 hour or 24
hour time format, enter the proper time zone, and choose
Daylight Savings Time. When you select 12 hour time
formatting, the clock will read like a standard clock with 12
hour AM and 12 hour PM cycles. The 24 hour option sets
the eTrex to display a 24 hour cycle (Military Time).
To change the time format:
1. Press the
PAGE
Button and switch to the ‘MENU’
Page. Press the
UP
or
DOWN
Button and highlight
‘SETUP’. Press
ENTER
. The ‘SETUP’ Page appears.
2. Press the
UP
or
DOWN
Button and highlight ‘TIME’
and press
ENTER
.
3. Press the
UP
or
DOWN
Button and select the ‘TIME
FORMAT’ field and press
ENTER
.
4. Press the
UP
or
DOWN
Button, select 12 or 24 hours
and press
ENTER
. Press
PAGE
to get back to the
page of your choice.
Setup Page
The Setup Page
You can choose from
eight time zones plus
‘other’.
Reference
