Garmin G500, Руководство пилота

Страница: 434 / 440

10-2 Pilot’s Guide 190-01717-10 Rev. H
Qualification
GLOVE QUALIFICATION STEPS
Complete only the tasks for the capabilities relevant to the installed GDU(s).
1. Sit in the pilot’s seat.
2. Start the GDU in normal mode.
3. Perform the tasks listed in each checklist, tapping each key with a non-gloved
finger. It is not necessary to record any results for this step.
4. Repeat step 3 using a gloved hand.
5. For each task, determine whether the touchscreen response is the same or
worse than without the glove.
6. Record the results in the applicable column. Items that may cause the
operation to be worse include, but are not limited to:
•
Multiple attempts to select a key
•
Unintentional selection of adjacent key(s)
•
Excessive force on the touchscreen to select a key
7. If all applicable tasks produce the same response with and without a glove,
the pilot may use the glove in flight.
GLOVE QUALIFICATION PROCEDURE
Pilot:
Glove Description:
Circle the applicable TXi GDU and system function(s).
1060 700L 700P / PFD MFD EIS