Garmin G500, Руководство пилота

Страница: 374 / 440

8-20 Pilot’s Guide 190-01717-10 Rev. H
Fuel & Engine Indicating System
CALIBRATE FUEL FLOW
NOTE
If the calculated adjustment factor exceeds the 10 percent fuel flow
calibration limit, contact your dealer for support.
Calibrate fuel flow using the controls provided in the fuel computer. Re-calibration is
recommended following the first flight or any time there is a significant difference
between the estimated remaining fuel quantity and the actual amount of fuel in the
tanks.
1. Fuel aircraft to a known level (i.e., the bottom of the tabs inside each fuel
filler port).
2. Tap EST Fuel Remaining and enter the amount of fuel on board.
NOTE: This value must be at least 5 liters (2 gallons) greater than the previous
estimated fuel on board amount.
3. Burn no less than 10 percent of usable fuel. Burning more than 10 percent will
yield a more accurate calibration.
4. Refuel to the previously entered level.
5. Tap EST Fuel Remaining and enter the amount of fuel on board.
6. Tap Calibrate FFlow .
7. Enter the amount of actual fuel used. Note the adjustment value.
8. Tap Update Calibration .
9. Confirm the request.
10.Acknowledge the pop-up message.
8.6.2 Preflight
ADD FUEL
Update the remaining fuel quantity whenever fuel is added to the aircraft.
1. Fuel the aircraft.
2. Enter the appropriate fuel amount using the fuel computer.
8.6.3 En Route
LEAN THE ENGINE
1. Select the preferred leaning function from the Lean Mode menu.
2. Tap Lean .
3. Monitor the temperatures graph for reference peak events and lean the mixture
accordingly.