Garmin G500, Руководство пилота

Страница: 132 / 440

2-22 Pilot’s Guide 190-01717-10 Rev. H
Primary Flight Display
ALTIMETER CONTROLS & INDICATIONS
Selected
Altitude
•
Sets altitude bug on altimeter when configured
•
Bug automatically synchronizes across PFDs
•
If barometric minimums is set, selected altitude may be set
to same value as barometric minimums
•
Determines visual and aural alerts for approaching and
deviating from selected altitude.
•
Not selectable during EDM selected data lockout
(both field and bug turn gray)
•
Provides source data for the range to altitude arc display on
MFD map (GDU 1060 only)
•
Controls altitude preselect mode for various autopilots
•
Bug is removed upon system startup or by rotating control
knob to a value <-1,000 ft
Altitude Trend
Vector
•
Magenta trend vector at the left of the altitude tape
•
6 second prediction of altitude based on current vertical
speed
•
Absent if aircraft altitude remains constant or if data
needed for rate calculation is not available due to a system
failure
Barometric
Correction
Control
•
Displays in cyan digits at the bottom of altimeter tape
•
Pilot can select units to display in inches of mercury
(in Hg), Hectopascals (hPa), or Millibars (Mb)
•
Digits display in yellow when pilot and co-pilot TXi PFD
settings differ by more than 0.03 in Hg
•
Barometric Pressure Setting to 29.92 in. / 1013 Mb setting
when
STD BARO is selected
Minimums
Bug
•
Displays as a colored bracket for selected MDA/DH
minimums set on the altimeter tape
•
Bug is parked to the top or bottom of altimeter tape when
value is outside current visible range
•
Cyan bracket denotes BARO or RAD ALT minimums altitude
•
Magenta bracket denotes TEMP COMP minimums altitude
•
White bracket denotes close proximity above minimums
altitude
•
Yellow bracket denotes below minimums
•
Triggers “Minimums, Minimums” aural alert at MDA/DHs