Garmin G500, Руководство пилота

Страница: 431 / 440

190-01717-10 Rev. H Pilot’s Guide 9-29
Abnormal Operations
9.5.3 EDM Override
To deactivate EDM, disengage the autopilot. You may do this multiple ways:
On PFD: Tap Menu > Test > AP Disconnect .
On GMC 605: Push the AP bezel key.
On the yoke: Push the AP DISC button.
Activating autopilot will override EDM and return the autopilot to normal operation.
In this state:
•
EDM does not automatically reactivate until arming conditions are cleared
•
An advisory message alerts you to re-pressurize the cabin and reset the
autopilot
•
Override state annunciation appears beneath the autopilot banner
AUTO EDM
To reset EDM automatic activation following an override:
1. Descend below 15,000 ft.
2. Disengage and then re-engage the autopilot.
OR
1. Open the PFD Setup menu.
2. Toggle Auto EDM off and on.
Disabling the Auto EDM function may be desired if current cabin conditions are
causing erroneous activation of EDM. This can occur when:
•
Cabin altitude is above the configured threshold
•
GDU reports incorrect cabin altitude
Override Annunciation Override Advisory
This key allows you to manually enable or disable automatic
activation. During system power up, this function is active by
default.
When the function is off, manual activation of EDM is still
available.