Garmin G1000 NXi, Дополнительное руководство по обслуживанию, Страница: 158 / 171

G1000 Supplemental Maintenance Manual Page 8-4
Textron Nav III Series Revision 3
190-02128-04
8.6 DME Functional Check
For DME Functional Check, refer to the G1000 Nav III Line Maintenance Manual.
8.7 ADF Functional Check
For ADF Functional Check, refer to the G1000 Nav III Line Maintenance Manual.
8.8 GTS Traffic System Functional Check
This section is applicable to the GTS 800 (TAS) traffic systems. Perform the following tests to
verify GTS 800 operational and surveillance functions. Use a ramp tester such as a TIC TR220
or equivalent to perform the tests.
These tests are conducted at field elevation. Note that additional local traffic targets may
appear and are not an indication of improper system operation.
Note: Due to running the test at field altitude, additional traffic targets may be present, and are
not an indication of improper system operation.
Note: When an IFR6000 ramp tester is used with a GTS 800, the IFR6000 must be configured
for a distance that is 4 times the actual distance. For example, if the ramp tester is located 10 ft
away from an aircraft, the IFR6000 should be configured as if it were 40 ft away from the aircraft.
This will adjust the MTL setting of the IFR6000 such that it will see the GTS 800 low power
interrogations and reply to the interrogations.
NOTE
The aural TA annunciations are muted if the height above terrain is below 400 feet.
Figure 8-1, Traffic Map