22
6. PRESS the “RIGHT ARROW” button (
→
) to
advance the cursor to the right for changing its
value.
7. PRESS the “PROG” button to display “MENU
ITEMS”.
8. PRESS the “RIGHT ARROW” button (
→
) to
return to the normal OPERATING MODE.
To Change Alarm Auto / Manual:
1. PRESS and HOLD the “PROG” button for five, 5
seconds. (Display will flash GC450 and the
program version number).
2. PRESS the “PROG” button one time to display
“MENU ITEMS”.
3. PRESS the “MENU” button to display the menu
you want to adjust.
4. PRESS the “FUNCTION” button two times to
display “ALARM ”.
5. PRESS the “UP ARROW” button (
↑
) to change
the setting (AUTO/MANUAL).
6. PRESS the “PROG” button to display “MENU
ITEMS”.
7. PRESS the “RIGHT ARROW” button (
→
) to
return to the normal OPERATING MODE.
To Change Upper Platen Temperature:
1. PRESS and HOLD the “PROG” button for five, 5
seconds. (Display will flash GC450 and the
program version number).
2. PRESS the “PROG” button one time to display
“MENU ITEMS”.
3. PRESS the “MENU” button to display the menu
you want to adjust.
4. PRESS the “FUNCTION” button three times to
display “TOP TEMP”.
5. PRESS the “UP ARROW” button (
↑
) to change
the value of the flashing digit.
6. PRESS the “RIGHT ARROW” button (
→
) to
advance the cursor to the right for changing its
value.
7. PRESS the “PROG” button to display “MENU
ITEMS”.
8. PRESS the “RIGHT ARROW” button (
→
) to
return to the normal OPERATING MODE.
To Change Griddle Temperature:
1. PRESS and HOLD the “PROG” button for five, 5
seconds. (Display will flash GC450 and the
program version number).
2. PRESS the “PROG” button one time to display
“MENU ITEMS”.
3. PRESS the “MENU” button to display the menu
you want to adjust.
4. PRESS the “FUNCTION” button four times to
display “BOTTOM TEMP XXX”
5. PRESS the “UP ARROW” button (
↑
) to change
the value of the flashing digit.
6. PRESS the “RIGHT ARROW” button (
→
) to
advance the cursor to the right for changing its
value.
7. PRESS the “PROG” button to display “MENU
ITEMS”.
8. PRESS the “RIGHT ARROW” button(
→
) to
return to the normal OPERATING MODE.
To Add/Program a Optional Menu Clam:
1. PRESS and HOLD the "PROG" button for five, (5),
seconds. (Display will flash GC450 and the
program version number).
2. PRESS the "PROG" button twice to display
"SYSTEM SETUP."
3. PRESS and HOLD the "UP ARROW" button (
↑
)
for ten (10) seconds, "GAP CALIBRATION" will be
displayed.
4. PRESS the "PROG" button twice to display
"MENU ITEMS."
5. PRESS the "MENU" button to display “OPTIONAL
MENU (1)(2)(3) Clam”.
6. PRESS the “UP ARROW” button (
↑
) to change
“Y/N”.
7. PRESS the "FUNCTION" button to obtain
"REMOVE IN XXX".
8. PRESS the "UP ARROW" button (
↑
) to obtain the
desired number (O - 9).