![background image](http://html.mh-extra.com/html/garland/mwe2w/mwe2w_installation-operation-and-service-manual_3644240019.webp)
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION
INSTALLATION/OPERATION & SERVICE MANUAL - 1&2 PLATEN
PART #4527466 (12 Aug 2011)
Page 19
INSTALLATION & STARTUP
(continued)
Connect the hose and ensure the sleeve snaps fully
forward against the retaining ring.
With the manual shut-off valve closed, install the
other end of the hose to the gas supply. If the grill
is equipped with an optional front gas connection,
see the sub-section titled, “Front Gas Connection” on
the following page for dimensions and positioning
information.
8. Install
fl ue box to back of grill for single or double
platen (If required).
FLUE BOX CLIPS ON REAR LIP OF
GRILL & IS CENTERED SIDE TO SIDE
FLUE BOX IS NOT SUPPLIED
BY THE MANUFACTURER
FOR GAS GRILLS ONLY
9. Install grease bucket rails as shown below:
ATTACH SHUT-OFF
STICKER IN THIS
LOCATION
.750
RAIL
GREASE BUCKET
GREASE BUCKETS & RAILS NOT
SUPPLIED BY MANUFACTURER
10. Roll grill under hood. Grill must be level front to back,
side to side and diagonally. Adjust casters accordingly
to obtain fi nal level.
Hood Type & Platen Height
With the platens in the raised position, measure the height
from the front edge of the platen to the grill surface. If the
platen height is over 17” (431mm), it must be adjusted to
proper clearance by an authorized service agent.
45°
17in
[431
mm
]
MAX
LonWorks Information & Commissioning
To Activate the grill onto the Lonworks
network:
To enable the power line communications between the
grill and the Lonworks network the grill must fi rst be
commissioned onto the network.