![background image](http://html.mh-extra.com/html/garland/mwe2w/mwe2w_installation-operation-and-service-manual_3644240018.webp)
INSTALLATION/OPERATION & SERVICE MANUAL - 1&2 PLATEN
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION
PART #4527466 (12 Aug 2011)
Page 18
INSTALLATION & STARTUP
(continued)
POWER SUPPLY CONNECTION:
All electric connections must be made by a qualifi ed,
properly equipped technician.
NOTE: WIRING DIAGRAM LOCATED INSIDE
LOWER FRONT PANEL.
“DISCONNECT POWER BEFORE OPENING”
RECOMMENDED PLUG
MWG2W = 1X NEMA 15-30
MWE2W = 2X NEMA 15-50
MWG2W
HAS ONE ELECTRICAL CORD.
MWE2W
HAS TWO ELECTRICAL CORDS.
POWER CORDS & PLUGS
ARE NOT SUPPLIED
BY THE MANUFACTURER
RECOMMENDED PLUG
MWG2W
= 1X NEMA 15-30
MWE2W
= INSTALL LINE SIDE
MIN. #8AWG “JUMPERS”
INPUT 1 to INPUT 2
1X NEMA 15-60
Electrical Cable Hookup
SINGLE POWER SUPPLY CONNECTION
where required by local regulations
Electrical Cable Hookup
DUAL POWER SUPPLY CONNECTION
USA & some other
POWER CORDS & PLUGS
ARE NOT SUPPLIED
BY THE MANUFACTURER
INPUT 1
INPUT 2
INPUT 1
INPUT 2
1 x 20AMP NEMA 21-20
Ora Red Blk
Wh
Wht
Wht
t Wht Wht
E
E
L1
L1
L1
L1
L1
L1
L1
L1
Ora Red Blk
Wht Wht Wht
POWER CORDS
ARE NOT SUPPLIED
BY THE
MANUFACTURER
Hood-Interlock & Control Power Supply; where applicable
5. Install Front Gas connection: Isolate grill from any
power source by unplugging all electrical connections.
A. Rotate existing elbow as shown in the diagrams
below.
B. Attach support bracket (PN 4528775)to base
as shown with #10-24 screws and lock washers
supplied.
NOTE: For retrofi t applications, drill 2x .161 holes and
use self tapping screws provided.
C. Install 3/4” NPT nipple through support bracket and
onto existing elbow. Attach locking ring with 2x
#10-24 screws.
D. Install connector 3 inches long (Used on single
platen Only)
E. Install elbow to orientation show below.
F. Install
nipple.
G. Attach fl ex gas hose to nipple.
6. Install shut off sticker as shown above to bottom of
front control panel.
12 REF
1.75 REF
6.00
1.500
9.0
A
A
D
E
B
C
F
E
G
30°
INSTALL ELBOW #1026715 TO
ORIENTATION SHOWN
7. GAS GRILL ONLY,
(for electric grills, skip to step 8 ):
Install the included quick-disconnect gas hose to the
inlet fi tting on the underside of the grill by threading
brass male quick-connect coupler included with the
hose onto the factory-installed elbow.
MALE COUPLER
[INSTALL FIRST]
TO GAS
SUPPLY
FACTORY
INSTALLED
GAS INLET
UNDERNEATH GRILL
FLEXIBLE GAS HOSE
GAS
FLOW