Garland Enodis GD-152H, Инструкции по установке, эксплуатации и обслуживанию

Страница: 4 / 16

Part # 4519762 (01/05) Page 4
PRE INSTALLATION
Damage Check
Damage check: Check carton or crate for possible damage
incurred in shipping. After carefully uncrating, check for
“concealed” damage. Report any damage immediately
to your carrier
Rating Plate
All burner input ratings are shown on the serial, rating
plate of each unit and are readily visible by opening the
enameled door located below the control panel.
The correct type of gas for which the unit was
manufactured is noted on the rating plate, and this type
of gas must be used.
When corresponding with the factory or your local
authorized factory service center regarding service
problems or replacement parts, be sure to refer to the
particular unit by the correct model number (including
the prefix and suffix letters and numbers) and the
warranty serial number. The rating plate affixed to the
unit contains this information.
We suggest installation, maintenance and repairs should
be performed by your local authorized service agency
listed in your information manual pamphlet.
In the event you have any questions concerning the
installation, use, care or service of the product, write or
call our Product Service Department.
This product must be installed by professional personnel
as specified. Garland/U.S. Range products are not
approved or authorized for home or residential use,
but are intended for commercial applications only.
Garland / U.S. Range will not provide service, warranty,
maintenance or support of any kind other than in
commercial applications.
SPECIFICATIONS
MODEL NUMBER MANIFOLD
INLET SIZE
MANIFOLD PRESSURE
“WC
INPUT
BTU/H
GD-152H(J)(FF), GD-302H(J)(FF), GD-304H(J)(FF) 3/4” 4.0 10.0 14,800
GD-15F(J) 1/2” 4.2 9.0 45,000
GD-15G(J)(FF), GD-15GTH(J), GD-24G(J)(FF),
GD-24GTH(J), GD-36G(J)(FF), GD-36GTH(J)
3/4” 4.0 10.0 20,000
GD-18RB(J)(FF), GD-24RB(J)(FF),
GD-30RB(J)(FF), GD-36RB(J)(FF)
3/4” 4.0 10.0 15,000