Garland EdgeSafe M10G1ACv2, Руководство пользователя

Страница: 97 / 139

USER GUIDE
EdgeSafe 10G Modular Bypass | ​Firmware Rev Level: 0.3.3.2
Variable name Variablecode
(X=)
Type
Attributes
Value Description
ibs SnmpPassword 2.4 OCTET STRING
(SIZE(17..121))
write-only Define the SNMP v3 and WEB interface
password.
Parameter consists of old and new
passwords separated by semicolon. Take
effect after setting ibsSnmpApply
ibs SnmpApply
2.5 INTEGER
write-only apply (1) Activate all the SNMP changes.
ibs SysTime
3.1 OCTET STRING
(SIZE(1..32))
read-write
Set/Show device current time/Date.
ibs SysIp
3.3 IpAddress
read-write Set/Show IBS IP address.
ibs SysNetmask
3.4 IpAddress
read-write Set/Show IBS IP subnet mask.
ibs SysGateway
3.5 IpAddress
read-write Set/Show IBS gateway IP address.
ibs SysResetLog
3.6 INTEGER
write-only reset Reset/Clear IBS log file.
ibs SysReboot
3.8 INTEGER
write-only reboot (1) Reboot the IBS.
3.9
ibs UnitName
3.10 OCTET STRING
(SIZE(1..32))
read-write
Set/Show unit name
ibs SysTftpIp
3.11 IP Address
read-write Set/Show TFTP server IP address.
ibs SysTftpRoot
3.12
OCTET STRING
(SIZE(1..64))
read-write
Set/Show TFTP server root directory.
ibs SysUpdate
3.13 INTEGER
read-write update(1),
force(2)
Update the IBS firmware.
ibs SysUpdateStatus
3.14 OCTET STRING
(SIZE(1..1024))
read-only
Show IBS firmware update status.
ibs SysResetErr
3.14 INTEGER
read-write reset(1) Reset/Clear IBS errors.
ibsSysWhoami
3.15 INTEGER
read-write
on(1),
off(2)
Unit identification.
On/off system OK led blink.
ibsSysRemoteLog
3.16 INTEGER
read-write
on(1), off(2) Show/set remote log state.
NOTE: next SNMP command should be send
not before 1 sec after this command
ibsSysRemoteLogServerIp
3.17 IP Address
read-write
Set/Show remote log server IP address.
NOTE: next SNMP command should be
send not before 1 sec after this command
ibsSysNTP
3.18 INTEGER
read-write
on(1), off(2) Show/set NTP state.
ibsSysNTPServerIp
3.19 IpAddress
read-write Set/Show NTP server IP address.
ibsSysDayLight
3.20 INTEGER
read-write
default(1), off(2) Show/set daylight saving mode.
The daylight saving mode will be set finally
by ibsSysTimezone.
ibsSysTimezone
3.21
OCTET STRING
(SIZE(1..64))
read-write Show/set device timezone.
Timezone examples: America/Barbados,
Asia/Bangkok.
Full list of supported names can be found in
Linux. Command sets the default daylight
saving mode. To disable default daylight
saving mode perform ibsSysDayLight with
parameter OFF first. To complete timezone
setting reboot should be issued.
ibsSysWebUser
3.22 OCTET STRING
(SIZE(5..30))
read-write
Show/set the WEB user name.
ibsSysWebPassword
3.23
OCTET STRING
(SIZE(17..121))
read-write
Set the WEB user password.Set only
variable, read will return zero length
string. Parameter consists of old and
new passwords separated by semicolon.
ibsSysSaveConfig
3.24
OCTET STRING
(SIZE(4..20))
read-write
Save device configuration. Set only
variable, read will return zero.
ibsSysRestoreConfig
3.25
OCTET STRING
(SIZE(4..20))
read-write
Restore device configuration. Set only
variable, read will return zero. The unit
will be rebooted.
ibsSysRemoveConfig
2.26
OCTET STRING
SIZE(4..20))
read-write
Remove device configuration. Set only the
variable, read will return zero.
ibsSysListConfig
2.27 OCTET STRING
(SIZE(1..2550))
read-only
Show saved device configurations.
ibsSysShowConfigNext
3.28
OCTET STRING
(SIZE(1..2550))
read-only
Show saved device configurations next
buffer.
Garland Technology | 716.242.8500 | ​ garlandtechnology.com/support
97