USER GUIDE
EdgeSafe 10G Modular Bypass | Firmware Rev Level: 0.3.3.2
6.2 Commands list
M10GxSBP$ help
show/set_hb_emit,
show/set_op_mode,
show/set_lfp,
show/set_hb_interval,
show/set_hb_holdtime,
show/set_preserve_hb_mode,
show/set_bypass_mode,
show/set_inline_restore,
show_current_user,
show/set_ip,
show/set_netmask,
show/set_gateway,
show/set_time,
set_username,
set_password,
show/set_device_name,
whoami,
show_dev_alert,
show_ver,
show_config,
show_status,
show_hw_ver,
show_fw_ver,
show_tk_num,
show_fan_status,
show_appl_status,
show_terminal,
show_link,
show_log,
show/set_mgmt_port_params,
show/set_snmp_ver,
show/set_snmp_srv_ip,
show/set_snmp_username,
set_snmp_password,
apply_snmp,
show/set_trap,
reset_log,
set_default,
update,
reboot,
clear_errors,
show/set_web_https,
show_hb_pkt,
set_hb_defaults,
show/set_session_exp_time,
show/set_mgmt_port,
show/set_hb_dir,
show/set_hb_fail_mode,
show/set_remote_log_server_ip,
show/set_remote_log_status,
show/set_ntp_status,
show/set_ntp_server_ip,
send_ntp_request,
show_timezone_list,
show/set_timezone,
show_daylight_status,
show_support_info,
show/set_web_username,
set_web_password,
save_conf,
restore_conf,
show_list_conf,
remove_conf,
show/set_tacacs_multi_users,
show/set_tacacs_status,
set_tacacs_key,
show/set_tacacs_server_ip,
show/set_telnet_status,
show/clear_stat,
show/set_rs232_speed,
set/del_mgmt_permit_ip,
show/check_mgmt_permit_ip,
show/set_m2n,
show/set_hb_dst_mac,
show/set_hb_src_mac,
set_default_hb_macs,
show/set_web,
show/set_rx_tx_err_mode,
show/set_advanced_link,
show/set_default_advanced_link,
show/set_ssh_status,
show/set_int_vlan,
add/del_tacacs_server_ip,
show/set_tacacs_login_fallback,
show/set_m2m,
add/del_ntp_server_ip,
show/sel_snmp_entry,
add/del_snmp_entry,
show/set_snmp_access,
show/set_snmp_status,
show/set_snmp_msg_port,
show/set_snmp_trap_port,
add/del_snmp_srv_ip,
set/restore_cert,
show/set_authorization_status,
show/set_rs232_tacacs_login,
show/set_slct_bypass,
add/del_slct_bypass,
set/show_mgmt_vlan,
show/set_flow_control,
show/set_action_on_reboot,
show/set_radius_auth_port,
show/set_radius_acct_port,
show_sessions,
stop_all_sessions,
show/set_pas_bypass,
Exit - Exits from CLI and ends session (logoff).
Garland Technology | 716.242.8500 |
29
