Gardsman CTC-1052RV, Руководство пользователя

Страница: 28 / 39

25
function you desire.
)
If the levels of speaker volume and
microphone are adjusted in the two-way or
talk-only communication mode, please
note that these two levels will return to
preset values after ending a call.
3. TUNSTALL FORMAT:
„ Enter (C) to TALK ONLY
„ Enter (
＊
) to LISTEN-IN ONLY
„ Enter (3) to open TWO-WAY VOICE
COMMUNICATION
„ End a Call: enter (#) to HANG UP or
put the handset back into the base
cradle.
„ Enter (7) to Speaker Volume Control
and then press (6) or (4) to increase
or decrease the levels of speaker
volume in the “Two-Way” and “Talk
Only” communication modes.
„
Enter (8) to Microphone Sensitivity
Control and then press (6) or (4) to
increase or decrease the levels of
microphone sensitivity in the “Two-
Way” communication mode.
„ Press any DTMF key, except the
designed “hang-up” key (#), to add
another preset communication time.
Please note that when a particular
DTMF key is pressed, its designed
shortcut function will be executed &
the communication time will be
extended at the same time.
< < N N O O T T E E > >
)
If an alarm is triggered by WTRV, you
press the
DTMF key 2 over 1 second to
open the two-way communication no
matter what Follow-On choice you have
set.
)
Please note that if you wish to enable a
designed shortcut function, please press
DTMF keys over 1 second to enable the
function you desire.
)
If the levels of speaker volume and
microphone are adjusted in the two-way or
talk-only communication mode, please
note that these two levels will return to
preset values after ending a call.
z The allowable time duration for Follow-On
Period is set by Command #46 (1-10 mins).
z During Two-way Voice Communication, at
20 & 10 seconds before the Follow-On
period expires, CTC-1052RV will emit two
beeps to alert both the user and the
Monitoring Center Personnel.
z To extend the conversation, the Monitoring
Center personnel can press the DTMF
command again to add another 1-10 mins.
z Voice Communication can be terminated
by the following:
„
DTMF Commands:
Contact ID: 9
Scancom: 5
Tunstall: #
„ The RESET button is pressed.
„
Automatically hangs up after the
Follow-On Period expires.
z
Help Arrived Signaling
This function is only available for the digital
Contact ID reporting method, and when
Help Arrive Signaling (Command #33) is set
to enable.
„ Once the Follow-On Period or Call-
back is completed, CTC-1052RV will
start counting down the 15-min Help
Arrived Timer. The
HELP button
starts flashing.
„ By pressing the RESET button, CTC-
1052RV will report to the Monitoring
Center that help has arrived. The
HELP button stops flashing and
return to normal backlight.
„ If the RESET button is not pressed
within 15 mins, CTC-1052RV will
send another
Help Call report again
to inform the Monitoring Center that
no help has arrived.
„ CTC-1052RV will then enter the 15
mins waiting period again. If RESET
button is still not pressed, CTC-
1052RV will exit reporting mode and
return to Idle Mode.