6
3.1.2. CTC-835 Programmer
CTC-835 is a powerful programming tool (sold
separetely) that features a built-in keypad and
LCD display to help you to program the
medical alarm panels effeciently and
conveniently. It also features
Once-for-All
Uploading
, which allows you program on a
computer via the supplied
Pilot
software and
you can then upload all the settings to the
medical alarm panel simultaneously with a
single mouse click.
For detailed usages, please refer to the
Operation Manual of CTC-835 Programmer.
3.1.3. SMS Remote Programming
CTC-1052RV can be remotely programmed via
SMS commands. Please refer to section
3.3
SMS Remote Programming
for usage.
3.2. Programming Your 1052
z
How to enter Commands?
Please make sure CTC-1052RV is in
Programming Mode (RED LED flashes
continuously) before trying any CTC-
1052RV Command Functions. Please refer
to section
System Configuration, Entering
Programming Mode
.
z
Follow the protocol below to command
CTC-1052RV:
CC # DTMF
ACK
Function
Selection
# DTMF
ACK
1. 2. 3.
4.
5.
6.
1.
CC
= 2-digit DTMF Command
2.
#
=
Termination of the DTMF Command
3.
ACK
=
DTMF Command
Acknowledgement
On CTC-1052RV:
Short beep: Command succeeded
Long beep: Command failed
On the programming phone set:
Short beep: Command succeeded
Long beep: Command failed
4.
Function Selection
= According to
different Command you will have different
entering in this part, e.g. Tel. Number,
Account number, etc.
5.
# =
Terminates Function Selection
6.
ACK
= Function Selection
Acknowledgement
On CTC-1052RV:
Short beep: Command succeeded
Long beep: Command failed
On the programming phone set:
Short beep: Command succeeded
Long beep: Command failed
z
Follow the Command Steps to program
your CTC-1052RV:
Step 1.
Enter Command number (DTMF
Numeric Command, ex. (
01
), (
02
)…)
Step 2.
Press (
#
) to terminate the DTMF
Command.
Step 3.
One short beep will be heard for
successful Command entry.
Step 4.
Enter the desired Command function
number.
Step 5.
Enter (
#
) to terminate the Command
Operation.
Step 6.
CTC-1052RV will emit a short beep,
indicating successful programming.
The maximum interval between key strokes is
2 minutes
.
Otherwise, commands will be
ignored and CTC-1052RV will automatically
exit to Idle Mode.
z
Any erroneous programming must be
rectified and program again correctly.
Содержание CTC-1052RV
Страница 1: ...E1 MAR 30 2011...
