21
Immediately after powering up CTC-
1052RV
Exit
Programming
Mode
z
After the pre-set Timer expires, CTC-
1052RV will emit a beep at every 5
minutes to notify the user for 30 minutes.
z
When the Mobility timer is not reset after
30 minutes, CTC-1052RV will send a
Mobility Timer Expired
report to the
Monitoring Center.
z
After CTC-1052RV sends a
Mobility
Timer Expired
Report, but the Mobility
timer still not be reset, when reaching next
pre-set time, the CTC-1052RV will emit a
beep at every 5 minutes to notify the user
for 30 minutes. Yet, if no reset action after
30 minutes, the panel will send another
Mobility Timer Expired
report to the
Monitoring center and the step will
repeatly until Mobility timer is reset.
z
Mobility Timer can be reset by pressing
RESET
button once on CTC-1052RV or
whenever a movement is detected by PIR
Detector.
z
To disable the Mobility Timer function:
Set Command #44 to
0
(Disable), or,
Press and hold the
RESET
button on
CTC-1052RV for 16 seconds or
longer.
z
Disable the Mobility function in idle
mode:
Step 1:
When the system is in Idle Mode,
press & hold the Reset Button for 16
seconds.
Step 2:
During the 16-sec period, CTC-
1052RV will emit one short beep
Æ
a
double beep
Æ
continuous three short
beeps
Æ
a long beep
.
Step 3:
Release the Reset Button when you
hear the last long beep; a short beep
will sound to indicate the mobility
function is disabled.
<
<
N
N
O
O
T
T
E
E
>
>
)
Please use Command #44 to enable the
Mobility timer again.
4.1.8. No Pendant Present
z
This function is only available for the
digital Contact ID reporting method.
z
If there is no pendent being learnt into
CTC-1052RV 30 mins after powering up, it
will send a
No Pendant Learnt-in
report
to the Monitoring Center and repeat every
hour thereafter, until a pendant is
successfully learnt in.
<
<
N
N
O
O
T
T
E
E
>
>
)
The control panel will still send No
pendant Learnt-in report even when
1052RV Pro is only Learning WTRV.
But if WTRB is learnt in, the control
panel won’t send No pendant Learnt-
in report.
4.1.9. Country Code
The Phone Number Format for each SIM card
may vary between different Telecom
companies. Thus, you can either check with
your Telecom provider or follow the steps
described below to check the correct format.
Step 1:
Remove the SIM card from SIM card
holder on the Panel, and insert it into
a workable mobile phone.
Step 2:
Power on the mobile phone and send
a test SMS message to another
mobile telephone number.
Step 3:
Once the test message is received,
you can then check the phone
number format shown in the received
message.
<
<
E
E
X
X
A
A
M
M
P
P
L
L
E
E
>
>
With the phone number
0987654321
, the
format should either INCLUDE or EXCLUDE
Contry Code, which is “
886
” for Taiwan as
below:
INCLUDE
Country Code
+886987654321
EXCLUDE
Country Code
0987654321
Step 4.
Remove the SIM card from the Mobile
phone and insert it back into SIM
Card holder on Panel.
A. If the Phone Number Format EXCLUDES
Country Code, please skip this section.
B. If the Phone Number Format INCLUDES
Country Code, please proceed to SMS
Содержание CTC-1052RV
Страница 1: ...E1 MAR 30 2011...
