Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: [email protected]
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
30
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: [email protected]
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
Operation of the Brushcutter / Line Trimmer
Fuelling
IMPORTANT:
Fuel goes off after about 3-4 months. If you find your unit does
not start, first change the fuel in the tank with newly purchased fuel.
WARNING:
Do not refill fuel tank while engine is running or is hot.
Move at least 10m away from the refuelling site before starting engine.
NOTE.
Do not use fuel that contains ethanol. Use fresh unleaded fuel.
Do not smoke when refuelling or operating the product.
• Be careful not to admit dust, dirt, water or other foreign objects into
the fuel.
• Wipe off spilt fuel thoroughly before starting engine.
• Ensure you DO NOT fuel the unit in close proximity to any open flames,
lit cigarettes, or hot objects.
1. Unscrew the fuel tank cap (5) and pour
fresh unleaded fuel into the tank with the aid
of a funnel. (Fig. AW)
NOTE:
The fuel tank capacity is 800mL.
Be careful not to spill any mixture. If this
happens, wipe the spill with a clean rag.
2. Replace the fuel cap (5) taking care NOT to cross
thread the cap on the fuel tank (6). Tighten the
cap firmly in a clockwise direction.
3. When starting the engine ensure it is at least 10m away from the area
where the fuel tank has been filled up in order to avoid any risk of fire.
• Always use extreme care when handling fuel! Fuel is highly flammable.
• Never attempt to fuel the product if the fuel system components are
damaged or are leaking.
• Never attempt to refuel the engine while it is running or still warm,
allow it to cool before fuelling.
• Never smoke or light any fires near the product or fuels.
AW.
