Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: [email protected]
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: [email protected]
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
13
5. Check the oil mark on the dipstick. It should be
approaching the top mark on the dipstick
(Fig C). Be careful not to overfill. (Fig D)
6. If the oil level is not close to the top oil mark line,
then add small amounts of oil and
repeat steps 3,4 & 5 until the oil level is
approaching the top oil mark on the dipstick.
DO NOT OVERFILL. Do Not EXCEED the upper
mark on the dipstick.
7.
IMPORTANT:
The motor should NEVER be
started if the oil level is below the low oil mark.
Always check the oil level before starting
ensuring the brushcutter / line trimmer is
positioned as per step 1 for checking.
8. When the oil level is at the upper oil level mark,
replace the dipstick and thread in the dipstick in
a clockwise direction until the dipstick is firmly in
place. The Sealing O ring on the shoulder of the
dipstick should be fully compressed when
the dipstick is firmly hand tightened.
C.
UPPER LOWER
MARK MARK
D.
DO NOT
OVER FILL
