4
5
Fitting the intake cover:
NOTE: A safety switch will prevent the unit from starting if the
intake cover
4
is not latched closed.
1. Place the intake cover
4
on the lower opening of the garden
blower and turn the intake cover
4
clockwise up to the stop
(bayonet fastening).
2. Tighten the fastening screw
5
.
To remove the intake cover
4
, loosen the fastening screw
5
,
turn the intake cover
4
anti-clockwise and remove it.
Assembling for vacuum use:
6
ß
6b
ß
6a
Fitting the vacuum tube:
WARNING! Do not use the vacuum
6
unless the lower tube
ß
6b
to
fitted to the upper tube
ß
6a
.
1. Align the seams of the lower tube
ß
6b
and upper tube
ß
6a
.
2. Press the tubes
ß
6a
/
ß
6b
together until they are fully engaged.
6
5
NOTE: A safety switch will prevent the unit from starting if the
vacuum tube
6
is not installed correctly.
3. Place the vacuum tube
6
on the lower opening of the garden
vacuum and turn the vacuum tube
6
clockwise up to the stop
(bayonet fastening).
4. Tighten the fastening screw
5
.
To remove the vacuum tube
6
, loosen the fastening screw
5
,
turn the vacuum tube
6
anti-clockwise and remove it.
20
GB