963KFSc – Page 6 – 10/08
Fig. 6
7)
Place the notches in bottom edge of Tub Supports Front/Back (Wc) over the dowels in
the Front and Back Aprons. Fasten the tub support frame to the aprons with 4x30mm
Screws (C) through the predrilled holes. See Figure 7.
Fig. 8
8)
Insert the Tub (Xc) and lay the Tub
Lid (Yc) over the tub. See Figure 8.
6)
Attach the Tub Side Supports (Vc) to the Tub Supports Front/Back (Wc) by gluing two
Dowels (D) into the predrilled holes in the Front/Back Supports and in the ends of the
side supports. The notches in the Side Supports (Vc) must face up. The two notches in
theTub Supports Front/Back (Wc) must face down. The ends of the front/back supports
will extend beyond the sides. See Figure 6.
Fig. 7
Vc
D
D
D
D
Wc
Wc
Vc
C
Xc
Yc
D
x8
C
x4
