5
)
Attach the Bottom Shelf Assembly (Tc) to the Legs (Sc) with one
8x60mm Hex Bolt (Ec),
Washer (Fc) and Hex Nut (Gc) through the single predrilled hole in each leg. See Figure 5.
Using the predrilled holes, attach a Bottom Shelf Side Apron (U
c) to each end of the
bottom
shelf assembly with four 4x40mm Phillips Screws (B).
Set the hutch over the back edge of the center shelf assembly.
There are two blind holes
in each end of the center shelf assembly and two in the back ed
ge. There are also two
holes in the bottom of the hutch sides and two in the hutch apr
on. Start 4x40mm Phillips
Screws in the blind holes until they begin to come through the
top. Align the holes in the
hutch sides and apron over the screws and complete inserting th
e screws. See Figure 5a.
Tc
Fig. 5
Fig. 5a
Ec
x4
Gc
x4
Fc
B
x4
Ec
Ec
Ec
Ec
Fc
Ec
Fc
Gc
Gc
Fc
Fc
Ec
Hc
Uc
Uc
x14
963KFSIc – Page 5 – 10/08