PP610/612 LED lighting controllers - User Manual
Use the
p
and
q
buttons to select
CON
. (PU1
and PU2 are also displayed). Press
SELECT
.
CUR
is displayed. Wait for one second...
Use the
p
and
q
buttons to select the required
current in Amps.
Note:
Refer to:
Section 9.3.5, Setting numeric
.
Press
SELECT
.
dONE
is displayed for one second.
The PP610 sets the output current.
9.4.2
Setting pulsed operation
Pulsed output on a PP610 controller can be set up using Simple Set-Up.
Set up pulsed mode as follows:
The PP610 is ready. Press and hold
SELECT
for
one second.
—
28
—
