Ganz digimaster DR-4FX1, Руководство по эксплуатации

Страница: 31 / 102

３１
System Setting
System Management
You can check, update or reset the system information.
1. From
<SYSTEM SETUP> - <SYSTEM>
, select
<SYSTEM MANAGEMENT>
.
2. Use the
[▲▼
◀▶
/ENTER]
buttons on the remote
control or use the mouse to set each option of the
system management.
>FW UPDATE : you can update the current software
with the latest version.
>FACTORY DEFAULT : Return the DVR settings to
the factory default.

If you proceed with the firmware upgrade or
select to reset to the factory default, all current
settings of the DVR will be erased.
In such a case, you must configure the network,
time and recording settings again.
>SYSTEM DATA : Save the system settings or get
the system information from other device.
- SAVE : Store the DVR settings to a storage device.
Connect the storage device to the USB port of DVR.
- LOAD : Apply the settings of the storage device
to the DVR. Connect the storage device to the
USB port of DVR.
>PASSWORD : Open or close the dialog box for
settings of the menus: quit, system settings, record
settings, backup, and search.

If it is set to
<Off>
, note that the ADMIN account
is only effective and access to all menus will be
restricted.
>EXPIRED TERM OF PASSWORD : You will be
prompted to change the current password after a
certain period of time.
>AUTO LOGOUT : If there is no user input for a certain period of time, you can set to log out
automatically.
>WAIT TIME : Specify the waiting time for Auto Logout.
3. When done, press the
[EXIT]
button on the
remote control or click
<CLOSE>
in the lower screen to return to the previous menu.