G&D DVIVision Скачать руководство пользователя

Страница: 5 / 60

Safety guidelines

G&D DVIVision ·

Safety guidelines

Please read the following safety guidelines attentively before you start running the

G&D product. The guidelines help to avoid damage to the product and prevent pos-

sible violations.

Inform all persons that use this equipment in detail about these safety guidelines.

Observe all warnings or operating instructions put on the device or stated in this

operating guide.

Avoid the risk of electric shock

To avoid the risk of electric shock, do not open the device or remove the covers.

If service is required, please contact our technicians.

Disconnect the main power plug or the power supply before installation

Before installation, ensure that the device has been disconnected from the power

source. Disconnect the main power plug or the power supply of the device.

Ensure constant access to the power plugs

Ensure during the installation of the devices that the power plugs remain accessible.

Do not cover the ventilation openings

Ventilation openings prevent the device from overheating. Do not cover them.

Ensure proper installation position

For reasons of electric safety, the device has to be installed upright and horizontally.

Avoid the risk of tripping over cables

Ensure that there is no risk of tripping over cables.

Only use a grounded electrical outlet

Operate this device by using a grounded electrical outlet.

Use only the provided G&D power pack

Operate this device with the provided G&D power pack or with the power packs

listed in the operating manual.

Operate the device only in the intended area of application

This device has been designed for indoor use. Do not expose it to extreme cold,

heat or humidity.

Содержание DVIVision





























































Результаты поиска

Содержание DVIVision

Отзывы:

Похожие инструкции для DVIVision

Бренды по названию

Популярные бренды

G&D DVIVision, Инструкция по установке и эксплуатации

Результаты поиска

Содержание DVIVision

Отзывы:

Похожие инструкции для DVIVision

Бренды по названию

Популярные бренды