G&D DVIVision, Инструкция по установке и эксплуатации

Страница: 28 / 60

Configuration
24 · G&D DVIVision
Activating or deactivating the video compression
The video signal usually is transmitted between the computer module and the user
module in a compressed way. Due to this compression, the picture on the console
monitors are normally displayed lossless and judder free.
Under certain conditions, moving pictures can cause a special
tearing
effect on the
monitors of the remote console. In this case, the monitor image consists of two sub-
sequent frames that are
partly
displayed:
The lower part of the picture shows a part of the old frame, the upper part shows a
part of the new frame. At the point where both frames touch, the picture appears to
be “torn“.
In this case, deactivate the video compression to display the moving picture without
the tearing effect.
How to (de)activate the video compression:
This function can only be (de)activated in the setup menu.
Note: The missing video compression causes a small juddering at the monitor of
the remote console.
set
u
p m
enu
1. Establish the connection to the DVIVision system through the terminal
emulation program.
2. Use the arrow keys to select the row
Video Compression
.
3. Press the
Space
key (repeatedly) to (de)activate the video compression:
Enabled
 activates the video compression
Disabled
 deactivates the video compression
4. Press the
S
key to save the settings.