G&D DP-Vision-CAT Series, Инструкция по установке и эксплуатации

Страница: 102 / 168

Installation
G&D DP-Vision-CAT · 15
English
Connecting further interfaces of ARU/ARU2 variants
USB 2.0 Devices: Use the two interface on the back and the two interfaces on the front
to connect USB devices.
USB 2.0 Trans. Plug a category 5e (or better) twisted pair cable, which is available as
accessory, into this interface of the ARU2 variant. Connect the other end of the cable
to the USB 2.0 Trans. interface of the computer module.
Connecting an additional interface of the CON-2 variants
Transmission 2: Plug a category 5e (or better) twisted pair cable, which is available as
accessory, into this interface. Connect the other end of the cable to the respective
interface of a compatible computer module or matrix switch.
ü
NOTE:
The USB 2.0 Devices interfaces of ARU and ARU2 variants support different
data rates:
 ARU variants: full speed
 ARU2 variants: high speed
NOTE:
With the also available CON-2 versions of the user modules, you can con-
nect a console to two compatible digital extenders.
Alternatively, you can connect a compatible matrix switch to each of the two
channels instead of a digital extender.
RS232
DP Out Micro In Speaker
Main P
ower
Red. Power
Mouse
Keyb.
Generic
Keyb./Mouse Transmission
USB 2.0 Trans.
USB 2.0 Devices
RS232
DP Out
Main P
ower
Red. Power
Mouse
Keyb.
Generic
Keyb./Mouse Transmission 1
Transmission 2
Micro In Speaker
USB Devices