G&D DP-Vision-CAT Series, Инструкция по установке и эксплуатации

Страница: 133 / 168

Configuration
46 · G&D DP-Vision-CAT
How to configure the Freeze mode:
OSD
1. Press Ctrl+Num (default) to open the on-screen display.
2. Select the row Console setup and press Enter .
The Freeze mode is adjusted separately for each video channel of the user module. The
following options can be adjusted separately for each video channel of multi-channel
devices.
3. Under Freeze mode press F8 to select on of the following options:
off  Freeze mode is disabled ( default )
on  Freeze mode is enabled
4. If the Freeze mode is active, press F8 to select one of the options available
under Freeze visualization :
frame  shows a coloured frame when disconnected
OSD  shows Frozen and the time passed since disconnection
frame+OSD  shows a coloured frame ( frame ) and Frozen ( OSD )
5. Press F2 to save your settings.
Co
nf
ig
Pan
el
1. In the menu, click on KVM extender .
2. Click on the computer module (CPU) you want to configure and then click
on Configuration .
3. Click on the tab Video channels .
4. When using a multi-channel device, click on the desired video channel and
then click on Configuration .
5. In the Freeze mode field, select one of the following options:
Off  Show no image if the connection is lost (default).
On | OSD timer + frame  Display of a coloured frame in case of a
disconnection as well as display of the warning
Frozen and the time elapsed since the
disconnection.
On | Frame  A disconnection is indicated by a coloured frame.
On | OSD  Display of the warning Frozen and the time elapsed
since the disconnection.
6. Click on Save .